| home | products | checkout | contact  
  PRODUCTS      



Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

 
R2-D2 CS:R
1 of 2

These skins have been updated to make them easier to prepare, will show which panels always get removed, and include parts to assemble your own coin returns, which you can glue to the coin return faces, which are also provided as part of the rolled outside skins.

R2-D2 CS:R Aluminum Skin. This skin is very nicely laser cut, deburred, and rolled in 4 pieces. Front and back, inside and outside pieces. The skin will ship in a custom foam cradle and custom box to continental US addresses via UPS and Fedex Ground service, and Priority Mail for all locations outside the U.S., and other U.S. destinations.

Please enter your Astromech display name in the comments.

If you use sbcglobal for email, you will probably not receive communications from the store.

I'll apologize in advance for the cost to ship outside the U.S. It keeps rising.

Price: $295.00

R2-D2 CS:Rh
1 of 2

*** I have one set of the last version of these skins available. They do not have the revised back update, which some may find to be a benefit, nor do they come with the coin return flat pack. $150 plus shipping. If you want them email me philip@rebelscum.com. ***

R2-D2 CS:Rh Aluminum Skin version for the Holme Made frame. This skin is very nicely laser cut, deburred, and rolled in 4 pieces. The rolling is complete, and will roll all the small panels as well. Front and back, inside and outside pieces. The skin will ship in a custom foam cradle and custom box to continental US addresses via UPS and Fedex Ground service, and Priority Mail for all locations outside the U.S., and other U.S. destinations. 

The skin includes a coin-returns flat-pack kit.

Please enter your Astromech display name in the comments.

If you use sbcglobal for email, you will not receive communications from the store.

 

Price: $295.00

R2-D2 CS:L
1 of 2

R2-D2 CS:L Aluminum Skin. This skin is very nicely laser cut and rolled in 4 pieces. The rolling is complete, and will roll all the small panels as well. Front and back, inside and outside pieces. The skin will ship in a custom foam cradle and custom box to continental US addresses via UPS or FEDEX Ground service, and Priority Mail for all locations outside the U.S., and other U.S. destinations.

Please enter your Astromech display name in the comments.

If you use sbcglobal for email, you will not receive communications from the store.

 
 
Price: $275.00

R2-D2 Curved Rear Logic Display
1 of 3

R2-D2 Curved Rear Logic Display. Includes aluminum outer bezel, aluminum inner bezel, both with matching curve to replica R2's display fiber mount. Clear overlay acrylic, three different fiber location acrylics, so you can choose 112 fibers arrayed "wonky", like R2, somewhat less wonky, and one that holds 96 fibers, in case you want to keep your current electronics (from joymonkey). You will need to redo your fiber optics.

You may also choose to include front logic displays with this order. 

 

 

Front-Logic-Display
None
Pair (+$60.00)
Price: $175.00

R2-D2 Flat Rear Logic Display Bezel

R2-D2 Flat Rear Logic Display bezel. 

 

 

Price: $135.00

R2-D2 Wide-Mouth Holo-Projector
1 of 13

Note: If you are buying more than 1 HP, selected qty 1 and the options and mounting location you want for that one, and add to cart. Then, subsequently, do the same thing for the next ones. This matters as the mounting rings are custom drilled for the three locations, front, back and top.

These Holo-Projectors are spec in the visible part, but have a dramatically larger rear access opening, and are very large inside, with two different "steps" you can use to mount electronics. They come with 2 sets of laser cut acrylics you can customize for your application. A lens and retaining ring are installed in each HP.

 

 

 

 

Price: $112.00

R2-D2 Front Logic Display Bezels

R2-D2 Front Logic Display bezels (pair). 

UK Order Note: Orders shipping to the UK must be at least $180 plus shipping. Details here ->   https://rebelscum.com/ukvat.asp

 

Price: $65.00

R2-D2 HP Mounting Rings

These rings are used to mount a Holo-Projector using shouds offered with my Holo-Projectors. They also fit BobC shrouds. Use this item if you only need the mounting rings. Put in the notes if this is for front / rear, or top location.

 

 

 

Price: $40.00

R2-D2 Dome Bullets
1 of 2

R2-D2 Dome Alignment Bullet set of 6. These are threaded 10-32 x .25" diameter, giving you more precise adjustment than 10-24 threads. Drill your dome ring to just slip over the bullets, add a slight chamfer, and these will enable quick and easier alignment and removal of dome. Your current screws may be 10-24, so be sure and check.

There is an option to also order stainless screws and nuts that fit the Rockler bearings and dome bullets.

UK Order Note: Orders shipping to the UK must be at least $180 plus shipping. Details here ->   https://rebelscum.com/ukvat.asp

Screws/Nuts
No Screws
6 screws 18 nuts (+$5.00)
Price: $30.00

R2-D2 Dome Topper
1 of 5

This is a replica of one of the real R2 dome toppers. It happens to be the one I took photos of when I was around this particular R2 when Don Bies had it at Steve Sansweet's Rancho Obi-Wan for a photo shoot years ago. Of all the toppers I've seen, it's the most interesting since it has a beveled edge instead of just being rounded over.

It's aluminum and made in two pieces, so finishing is easy. It fits into the hole inside Daren's alum dome, and is held with an included 1/4" ss washer and ss 1/4-28 nut.

UK Resident VAT Disclosure: https://www.rebelscum.com/ukvat.asp

Price: $20.00

R2-D2 Maxdrive Pro

This kit includes precision machined parts used to build a MaxDrive designed by Maxstang in the Astromech R2 forum. This is all the parts you could have waterjet or laser cut by a service provider. The difference is these parts are machined to tolerances that will allow you to most likely do a straight-forward assembly. The parts will come unassembled, but you can see what they look like in the photo.

These have a more robust attachment between the plates and the eccentric axle mount is machined from a single piece.

There is an option to order the ten 1/2" x 1-3/4" aluminum spacers, which will save you a little money over McMaster.

International shipping is quite expensive as the pair weigh 5lbs, which requires Priority postage.

Please see Maxstang's Maxdrive thread here: https://astromech.net/forums/showthread.php?40891

 

 

 

 

Maxdrive Spacers
None
10 Spacers (+$23.00)
Price: $295.00

R2-D2 HP Slip Ring

Set of three 6-wire slip rings. This is the same slip ring included with the Kid-Proof Holo Projector upgrades.

UK Order Note: Orders shipping to the UK must be at least $180 plus shipping. Details here ->   https://rebelscum.com/ukvat.asp

Price: $44.00

R2-D2 HP Slip Ring Mount BobC Qty 1 Only
1 of 4

BobC Version. Use this item to purchase only 1 HP Slip Ring / Servo Mount.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> https://www.rebelscum.com/kidproof.asp

Servo Screws 1
4 screws
8 screws (+$1.00)
Filthy Adapter 1
No adapter
Adapter for Filthy LED (+$1.00)
Price: $95.00

R2-D2 HP Slip Ring Mount BobC Qty 3 Only
1 of 4

BobC Version. Use this item to purchase only 3 HP Slip Ring / Servo Mounts at a $5.00 discount.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a BobC Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 3
4 screws
8 screws (+$3.00)
Filthy Adapter 3
No adapter
Adapter for Filthy LED (+$3.00)
Price: $280.00

R2-D2 HP Slip Ring Mount Dave Shaw Qty 1 Only
1 of 4

Dave Shaw Version. Use this item to purchase only 1 HP Slip Ring / Servo Mount.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 1
4 screws
8 screws (+$1.00)
Filthy Adapter 1
No adapter
Adapter for Filthy LED (+$1.00)
Price: $95.00

« Previous | 1 | 2 | »

Rebelscum
101 Marshall Creek Rd.
Roanoke, TX 76262
(214) 207-7355

 

     
 

Copyright © Rebelscum 2021